Lexmark error code 80.xx
Quick answer
The maintenance kit life ladder: 80.0x nearly low, 80.1x low, 80.2x very low, and 80.31 "replace maintenance kit, recommended life exceeded". Like the other ladders this is a page counter reaching a threshold, not a detected failure — the machine keeps printing until the final stage and often past it.
Caution: This step can be done wrong in a way that is costly or hard to undo, including voiding your warranty. Check your model's manual before proceeding.
Before you try the solution
- 1. Copy the complete message exactly as shown, including any letters, spaces, or punctuation around 80.xx.
- 2. Find the printer's exact model number. The same-looking code can mean something different on another model family.
- 3. Let the current print, scan, or update operation stop before touching controls, paper paths, or covers.
Manufacturer-documented solution
The maintenance kit life ladder: 80.0x nearly low, 80.1x low, 80.2x very low, and 80.31 "replace maintenance kit, recommended life exceeded". Like the other ladders this is a page counter reaching a threshold, not a detected failure — the machine keeps printing until the final stage and often past it.
Model scope: the printer error codes table in your own model's Lexmark User's Guide
If the error is still there
- 1Return to the screen or job that produced the message and check whether the code has cleared.
- 2If 80.xx returns, do not repeat a risky procedure. Record when it appears and check the documentation for the exact model.
- 3Because this message involves opening the printer, service risk, or possible damage, stop and contact Lexmark support or a qualified printer technician if it persists.
Other Lexmark error codes
- 8.01"Close all doors." A door, cover, or the multipurpose feeder is not fully latched. Lexmark treats an unlatched door as a stop condition because the paper path and the high-voltage sections are only isolated when everything is shut.
- 82.xxThe waste toner bottle ladder on colour machines: 82.0x "nearly full", 82.1x/82.2x "almost full", then 82.3x/82.4x "replace waste toner bottle". The bottle collects toner cleaned off the belt and drums, so it fills as a function of pages printed and cannot be emptied and reused.
- 84.xxThe imaging unit or imaging kit life ladder — the drum, not the toner. It escalates the same way as the cartridge ladder: 84.0x nearly low, 84.1x low, 84.2x very low, then 84.3x/84.4x replace, at which point the guide states the recommended life has been exceeded. Confusing this with 88.xx means buying the wrong part.
- 88.xxThe toner cartridge level ladder, not a fault. Lexmark escalates through four stages: 88.0x "cartridge nearly low", 88.1x "cartridge low", 88.2x "cartridge very low", then 88.3x/88.4x "replace the cartridge" — the last of which may state the estimated pages remaining, or zero. Only the final stage is asking you to change anything.
- 200.xxIndicates the printer registered one or more sheets as jammed under the toner cartridge, not specifically 'at the front of the printer.' If no physical jam is found despite repeated occurrences, a jam sensor may be malfunctioning and require service.
- 31.xxA supply is missing or is not answering the printer, so Lexmark asks you to reinstall it rather than replace it. The second pair of digits names which one: 31.40-31.43 a toner cartridge by colour, 31.60 the black imaging unit, 31.64 the colour imaging kit, 31.35 the waste toner bottle, 31.80 the fuser, and 31.30 the transfer module (which asks for a restart instead). Reseating usually clears it; dirty contacts are the common cause.
Did this fix it?
One anonymous answer. No account, email address, or tracking profile.
Manufacturer reference
The meaning and documented action above were taken from the manufacturer source below.
Printer error codes — Lexmark CS73x User's GuideVerified against manufacturer documentation, last checked 2026-08-15. PrintDiag has no printers and no technician, so nothing here is claimed as tested on hardware.