Lexmark error code 58

Before you try the solution

1. 1. Copy the complete message exactly as shown, including any letters, spaces, or punctuation around 58.
2. 2. Find the printer's exact model number. The same-looking code can mean something different on another model family.
3. 3. Let the current print, scan, or update operation stop before touching controls, paper paths, or covers.

Manufacturer-documented solution

If the error is still there

1. 1Return to the screen or job that produced the message and check whether the code has cleared.
2. 2If 58 returns, do not repeat a risky procedure. Record when it appears and check the documentation for the exact model.
3. 3Because this message involves opening the printer, service risk, or possible damage, stop and contact Lexmark support or a qualified printer technician if it persists.

Other Lexmark error codes

• 55.1"Error reading USB drive. Remove USB." The printer cannot read the USB flash drive plugged into its front port. The companion code 55.2 is the same fault for a USB hub, which Lexmark asks you to remove. Neither affects normal network or cable printing.
• 59"Incompatible tray" — a fitted tray is not compatible with this printer. Distinct from 58, which is about how many trays are attached rather than whether a particular one belongs.
• 200.xxIndicates the printer registered one or more sheets as jammed under the toner cartridge, not specifically 'at the front of the printer.' If no physical jam is found despite repeated occurrences, a jam sensor may be malfunctioning and require service.
• 31.xxA supply is missing or is not answering the printer, so Lexmark asks you to reinstall it rather than replace it. The second pair of digits names which one: 31.40-31.43 a toner cartridge by colour, 31.60 the black imaging unit, 31.64 the colour imaging kit, 31.35 the waste toner bottle, 31.80 the fuser, and 31.30 the transfer module (which asks for a restart instead). Reseating usually clears it; dirty contacts are the common cause.
• 32.xx"Replace unsupported" — the printer recognises the supply but rejects it as not supported by this model. The second pair names the supply: 32.40-32.43 a colour cartridge, 32.60 the black imaging unit, 32.64 the colour imaging kit, and a 32.xy variant the fuser. This is a different fault from 31.xx (missing or unresponsive) and from 42.xx (right supply, wrong region).
• 33.xx"Non-Lexmark supply, see User's Guide" — the printer has detected a cartridge, imaging unit, or imaging kit that it does not identify as Lexmark-made. 33.40-33.43 is a colour cartridge, 33.60 the black imaging unit, 33.64 the colour imaging kit. It is a notice about the supply's origin, not a report of a hardware fault.