Canon error code 7500

Before you try the solution

1. 1. Copy the complete message exactly as shown, including any letters, spaces, or punctuation around 7500.
2. 2. Find the printer's exact model number. The same-looking code can mean something different on another model family.
3. 3. Let the current print, scan, or update operation stop before touching controls, paper paths, or covers.

Manufacturer-documented solution

If the error is still there

1. 1Return to the screen or job that produced the message and check whether the code has cleared.
2. 2If 7500 returns, do not repeat a risky procedure. Record when it appears and check the documentation for the exact model.
3. 3Because this message involves opening the printer, service risk, or possible damage, stop and contact Canon support or a qualified printer technician if it persists.

Other Canon error codes

• #753The Ethernet/LAN cable is not properly connected, blocking a network fax/scan-to-email/folder job. Check that the LAN cable is connected correctly.
• #001The original document is jammed in the ADF feeder during a fax/scan job. Remove the jammed original per the paper-jam troubleshooting section.
• 1000There is no paper in the rear tray, or the paper is not loaded correctly. Canon's remedy is to reload the paper, align the guides, set the paper information and press OK.
• 1200The scanning unit or cover is open. Closing it clears the message.
• 1240The operation panel is closed while a job was in progress. Open the operation panel and press OK to resume printing, or press Stop to cancel the job.
• 1300Paper is jammed while feeding from the rear tray. Canon's remedy is to pull the paper out slowly with both hands. If the paper tears, the procedure escalates to opening the printer to retrieve the fragments.