Canon error code 1660

Before you try the solution

1. 1. Copy the complete message exactly as shown, including any letters, spaces, or punctuation around 1660.
2. 2. Find the printer's exact model number. The same-looking code can mean something different on another model family.
3. 3. Let the current print, scan, or update operation stop before touching controls, paper paths, or covers.

Manufacturer-documented solution

If the error is still there

1. 1Return to the screen or job that produced the message and check whether the code has cleared.
2. 2If 1660 returns, do not repeat a risky procedure. Record when it appears and check the documentation for the exact model.
3. 3If the documented action does not clear 1660, contact Canon support or a qualified printer technician with the model number and complete message.

Other Canon error codes

• 1650The ink cartridge cannot be recognized — it may not be seated properly, or an incompatible/subscription cartridge is installed. Remove the cartridge and install the original cartridge that shipped with the printer, or press Stop to cancel the current operation.
• 1682A FINE cartridge cannot be recognized. Replace the FINE cartridge following Canon's replacement guide; if that doesn't fix it, the printer may have internal damage requiring service from an authorized Canon repair center. Unplugging erases stored faxes.
• 1688The ink has run out. Canon's remedy is to replace the tank, or to hold Stop for at least five seconds to disable remaining-ink detection. Canon warns that continuing to print in this condition may damage the printer.
• 168CAn ink tank is installed in the wrong position. Canon's remedy is to open the cover and move the tank named on the screen into its correct slot.
• 1000There is no paper in the rear tray, or the paper is not loaded correctly. Canon's remedy is to reload the paper, align the guides, set the paper information and press OK.
• 1200The scanning unit or cover is open. Closing it clears the message.