Brother error code No Access Point

Before you try the solution

1. 1. Copy the complete message exactly as shown, including any letters, spaces, or punctuation around No Access Point.
2. 2. Find the printer's exact model number. The same-looking code can mean something different on another model family.
3. 3. Let the current print, scan, or update operation stop before touching controls, paper paths, or covers.

Manufacturer-documented solution

If the error is still there

1. 1Return to the screen or job that produced the message and check whether the code has cleared.
2. 2If No Access Point returns, do not repeat a risky procedure. Record when it appears and check the documentation for the exact model.
3. 3If the documented action does not clear No Access Point, contact Brother support or a qualified printer technician with the model number and complete message.

Other Brother error codes

• No Drum UnitThe drum unit is not properly installed in the machine. Reinstall the toner cartridge and drum unit assembly together.
• No Paper T1Tray 1 failed to feed paper — the tray may be empty or paper loaded incorrectly. Refill or reload the tray, check the paper guides, and avoid overfilling.
• No Response/BusyThe dialed fax number was busy or the recipient's machine did not respond. The sending unit automatically redials within 5 minutes; if still busy/unanswered it displays this message and prints a report noting the same. Verify the number and phone line, and check that the recipient's machine/line isn't at fault.
• No TonerThe toner cartridge is not installed correctly in the drum unit. Remove and reinstall the cartridge.
• Near EmptyOne or more ink cartridges are running low. Order replacement cartridges for when printing stops.
• 2-sided DisabledThe back cover is not fully closed, or the 2-sided (duplex) tray is not installed correctly, so duplex printing is disabled. Close the back cover completely and reseat the duplex tray.