Brother error code Low Temperature

Before you try the solution

1. 1. Copy the complete message exactly as shown, including any letters, spaces, or punctuation around Low Temperature.
2. 2. Find the printer's exact model number. The same-looking code can mean something different on another model family.
3. 3. Let the current print, scan, or update operation stop before touching controls, paper paths, or covers.

Manufacturer-documented solution

If the error is still there

1. 1Return to the screen or job that produced the message and check whether the code has cleared.
2. 2If Low Temperature returns, do not repeat a risky procedure. Record when it appears and check the documentation for the exact model.
3. 3If the documented action does not clear Low Temperature, contact Brother support or a qualified printer technician with the model number and complete message.

Other Brother error codes

• 2-sided DisabledThe back cover is not fully closed, or the 2-sided (duplex) tray is not installed correctly, so duplex printing is disabled. Close the back cover completely and reseat the duplex tray.
• Authentication Error 01The four-digit PIN entered for a Web Connect service account doesn't match the registered account PIN. Re-enter the correct PIN.
• Authentication Error 02The temporary ID used to link a Web Connect account is wrong, already used, or expired (temporary IDs are valid only 24 hours). Get a new temporary ID and retry.
• B&W Print OnlyOne or more colour ink cartridges have reached end of life. The machine still prints in black and white for roughly four weeks before stopping.
• Cannot DetectAppears when a new ink cartridge was installed too quickly, a non-Brother cartridge was used, or the cartridge isn't seated correctly. Remove and reinstall the cartridge slowly until it clicks into place, using genuine Brother ink.
• Cannot Detect Ink VolumeThe machine cannot measure the remaining ink. Brother attributes this to non-genuine ink not being detected. Also displayed as "Cannot Detect Ink".