Brother error code Cooling Down
Quick answer
The temperature inside the machine is too hot. It pauses until it has cooled; Brother says to check that all vents are clear.
Caution: This step can be done wrong in a way that is costly or hard to undo, including voiding your warranty. Check your model's manual before proceeding.
Before you try the solution
- 1. Copy the complete message exactly as shown, including any letters, spaces, or punctuation around Cooling Down.
- 2. Find the printer's exact model number. The same-looking code can mean something different on another model family.
- 3. Let the current print, scan, or update operation stop before touching controls, paper paths, or covers.
Manufacturer-documented solution
The temperature inside the machine is too hot. It pauses until it has cooled; Brother says to check that all vents are clear.
Model scope: Brother's Error and Maintenance Messages for your exact model
If the error is still there
- 1Return to the screen or job that produced the message and check whether the code has cleared.
- 2If Cooling Down returns, do not repeat a risky procedure. Record when it appears and check the documentation for the exact model.
- 3Because this message involves opening the printer, service risk, or possible damage, stop and contact Brother support or a qualified printer technician if it persists.
Other Brother error codes
- Comm.ErrorPoor telephone line quality disrupted a fax transmission. Resend the fax or connect to a different telephone line.
- CondensationCondensation may have formed inside the machine after a room temperature change. Brother's remedy is to leave the machine switched on and wait 30 minutes with the top cover open.
- Connection Error 02Network connection failed while using Brother Web Connect because the machine lacks network connectivity or the connection hasn't stabilized after startup. Verify the network connection is good and try again.
- Connection Error 03Connection to the Brother Web Connect server failed, indicating incorrect network/server configuration or a server-side issue. Check network settings.
- Connection Error 07Connection to the Brother Web Connect server failed because the machine's date and time settings are wrong. Correct the machine's date/time and retry.
- Connection Error (wireless session overlap)During Wi-Fi Protected Setup/AOSS wireless configuration, the machine detected more than one access point/router advertising WPS or AOSS mode at once. Ensure only one router/access point has WPS or AOSS mode enabled, then restart the wireless setup.
Did this fix it?
One anonymous answer. No account, email address, or tracking profile.
Manufacturer reference
The meaning and documented action above were taken from the manufacturer source below.
Error and Maintenance Messages (HL-L3290CDW and related models)Verified against manufacturer documentation, last checked 2026-08-13. PrintDiag has no printers and no technician, so nothing here is claimed as tested on hardware.